How to Use a Driveway Cleaner For Oil Stains

driveway cleaner for oil

There are many ways to clean an oil stain on a driveway. You can use WD-40, Coca-Cola, Baking soda, or even kitty litter. However, you should remember that you should avoid rubbing the chemicals on any plants that may be nearby. Also, it is better to clean the oil stain while it is still fresh. This way, you will reduce the amount of time you spend cleaning the driveway.


WD-40 driveway cleaner is a multi-purpose solvent, degreaser and oil spot remover that can help you remove oil stains from your driveway. You can use WD-40 to remove oil stains right after they occur. You should apply WD-40 to the spill while it is still wet and allow it to soak for at least five minutes before wiping it off.

There are many reasons why an oil stain on your driveway could happen. They can be unsightly and dangerous. In addition to being unsightly, oil stains can be difficult to remove from a concrete driveway. WD-40 driveway cleaner can help you remove these tough stains by breaking down the stain.

Baking soda

If you’re battling an oil stain on your driveway, baking soda can help you get rid of it quickly. Apply it in a thick layer on the affected area and allow it to sit for 20 to 30 minutes. After that, hose off the area with clean water. If you notice any spots, you can add more baking soda and scrub the area with a hard brush.

After the stain has dried, you can use a brush with a stiff bristle. Once the baking soda and water mixture is absorbed, scrub the area with a strong pressure. If the stain persists, repeat the process.

kitty litter

Kitty litter makes an excellent driveway cleaner for oil stains. It is highly absorbent and can remove even the largest spills. You can also use sawdust or cornmeal if you can’t get kitty litter. Although kitty litter is the best solution for large oil spills, make sure you clean off excess oil before you apply kitty litter to the driveway.

Alternatively, you can also use baking soda, dish soap, and laundry detergent to tackle oil stains. These products are effective because they have an alkali content that dissolves dirt and grease. A heavy-duty brush is recommended for applying them, since they help to scrub the surface.

Power washing

Power washing is a great way to remove oil stains from your driveway. Oil stains are not only unsightly, but also pose a danger to children and pets. They can also be tracked into your home and damage interior surfaces. Oil stains on your driveway should be removed as quickly and safely as possible.

The first step is to clear away all vehicles and toys from the area. Then, attach the hose to the pressure washer and begin washing the driveway. Use a fine nozzle to target oil spots.


Bleach is a common driveway cleaner, but it’s not the best choice for cleaning oil and grease stains. Bleach contains chlorine, which is extremely corrosive. This chemical is also not good for the environment, so it is best avoided. However, if you must use bleach for driveway cleaning, you should wear protective gloves and a face mask.

WD-40 is a good alternative for cleaning oil stains. The solvent properties in WD-40 will disperse the oil and pull it from the concrete. It can also get between the oil and the concrete, loosening the stain.

Related Content
Parking Lot Pressure Washing

Pressure Washing Companies

The Risks of Not Hiring Professional Pressure Washing Companies When it comes to hiring professional pressure washing companies, many people are hesitant. They worry that